HyboFOAM® E is closed-cell rigid foam plastic, based on PMI (polymethacrylimide) polymer, which does not contain any CFC's. HyboFOAM® E attributes a fine and unique cell size grade (less than 0.1mm).

The processing parameter is up to temperature of 150°C and maximum pressure up to 0.5 MPa. Structural components can be manufactured by the following cure methods; Autoclave, Vacuum bagged, RTM, VARTM, VARI，HP-RTM and others. Due to superb resin absorption property, engineer will seek an excellent balance between peel-off strength and light-weight requirement. To meet different dimension parts and geometry, it is very easy to shape HyboFOAM® E by thermo-shaping, bonding by various adhesive, and common CNC machine.

The application of HyboFOAM® E is pretty wide. Basically, due to unique density distribution and excellent di-electrics property, it is often used in radome, antenna, electronic, and acoustic equipment.

In order to better guide users, we have conducted extensive testing in various aspects, including:

· Moisture absorption performance

· Dielectric constant

· Compression creep

· High temperature mechanical properties

· Coefficient of thermal expansion

· Resin absorption rate

You can contact our sales team for more detailed test results.

Note: The above values are typical values of nominal density and cannot be used for product design and acceptance. Actual measured values may differ due to manufacturing deviations. Please contact our company's quality management department to confirm the material quality standards.